• Consists of 18 squares.
• Ladder rungs are made from hardwood (ash, hop-hornbeam).
• Two double-section ladders installed parallel to each other can be combined into a four-section apparatus.
• Metal support designed to connect the bracket and the square ladder.
• Static load tested.
• Dimensions: height 500 cm; width 116 cm.

GYM LADDER

• Gym ladder consisting of 19 hardwood rungs (ash, hop-hornbeam).
  
• Wall-attached rails enable the ladder to be set in inclined position.
  
• Static load tested.
  
• Dimensions: height 500 cm; width 50 cm.

• Hemp rope and hardwood rungs.
• Dimensions: height 500 cm; width 28.5 cm.

• With height marks at 3 m and 4 m.
• Dimensions: height 500 cm; diameter 42 mm.

• 
  Hemp rope with leather end cap.
• Dimensions: length 460 cm; diameter 32 mm.

• Universal metal bracket, consisting of two or three poles, suitable for all types and combinations of climbing apparatuses (rope, pole, ladder).
• The climbing apparatuses run on roller wheels along the sliding rail, to be stored against the wall.
• Standard distance between apparatuses provides for storage between wall bars.

• Ceiling suspended electrically hoistable bracket (when lowered in use at 5.5 m; when raised in use at 7 m).
• The bracket has five suspension points for easy installation of gym equipment.
• Equipment: three climbing ropes, two rope ladders, and double rings on ropes.
• The frame can be placed at greater distance from the wall for enhanced safety.